Spring-Fast ® - Cushioned Grommet Edging for Wire Abrasion Protection (UL94 V-0 compliant)
Spring-Fast ® is the fastest, safest, most reliable way to protect wires, cables, and tubing from abrasion. It locks on with finger
pressure in seconds, eliminating solvents, adhesives, ancillary materials and volatile organic compound (VOCs). Spring-Fast ® installs continuously and is very flexible for use on sharp corners and curved edges, such as flanged holes.
T / BT Series - 2 Axis Conformity
Features and Benefits:
T Series has the lowest profi le of any grommet edging available. Substrate is encapsulated with lubricious fusion bonded nylon having superior abrasion and chemical resistance. Heat continuous is 285°F (140°C). Attaches quickly to straight edges and inside and outside corners.
BT Series includes the “T” Series abrasion resistant subsurface and a polymer cushion Durometer 46 Shore D: a soft surface on which wires and cables are protected. Heat continuous is 185°F (85°C).
| Spring-Fast BT Series |
T Series
BT Series
M22529 Series - 2 Axis Conformity
Test Qualifications:
• FAA approved
• Eliminates adhesives
• Eliminates major environmental and safety concerns
• Adapts to a wide range of edge thicknesses
• For straight edges and inside and outside corners
• RoHS compliant
• Temperature Range: -40ºF ~ 185ºF (-40ºC ~ 85ºC)
• Voltage Breakdown: 60 Hz 1500 V
• Flammability: FAR 25.601, FAR 25.853
• Flammability: MIL-STD-202F Method 111A
• Random Shock and Vibration: MIL-STD-1344
• Random Shock and Vibration: Test Condition VI, Letter J
• Random Shock and Vibration: Overall rms G 41.7
• Salt Spray Testing: MIL-STD-202F Method 101D
• Salt Spray Testing: 2000 hours minimum
M22529/1 Series
M22529/2 Series
| Spring-Fast M22529 Series |
AP / BAP Series - Multi-Axis Conformity
Features and Benefits:
AP Series:
• Greater gripping strength for shock and vibration
• Operating temperature range: -40ºC to 181ºC
• Multi-axis flexibility inside and outside corners
BAP Series:
• Greater gripping strength for shock and vibration
• Includes a polymer cushion for abrasion protection
• Operating temperature range: -40ºC to 85ºC
• Multi-axis flexibility for rounded corners
| Spring-Fast BAP Series |
AP Series
BAP Series
BAP Aero / SL Series - Multi-Axis Conformity
Test Qualifications:
• UL94 V-0 compliant per File No. E113553 NZMT2
• Flammability per ASTM E 162
• Smoke Density per ASTM E 662
• Random Vibration per MIL-STD-102, Method 214A
• Mechanical Shock per MIL-STD-810C, Method 516.2
• Salt Spray (Corrosion) per MIL-STD-202F, Method 101D
• Humidity per MIL-STD-810F, Method 507.4
• Immersion per NASM22529, Paragraph 4.2.5
• Dielectric Withstanding Voltage per NASM22529
• Low Temperature per MIL-STD-810E, Method 502.3
• Temperature Cycling per MIL-STD-202G, Method 107G
| Spring-Fast BAP Aero Series |
BAP Aero White Series
SL Series
| Spring-Fast SL Series |
FM Series - Multi-Axis Conformity
Features and Benefits:
The FM Series "flush mounting" characteristic of one castle of each pair of gripping castles enhances the smoothness of the FM Series in its application. Its multi-axis flexibility is applicable to square inside corners, and outside corners with a minimum .250 (6mm) radii.
| Spring-Fast FM series |
FM Series
Spring-Fast ® Heritage - Aerospace Industrial and Military
| Aircraft Programs.pdf |
| Tactical Equipment.pdf |
| Military Programs.pdf |
| Spring-Fast Size Chart.pdf |